2/3/5/7 Ply Corrugated Cardboard Production Line
Corrugated Cardboard Production Line is the professional equipment for producing corrugated cardboard.The 2ply,3ply,5ply,7ply corrugated cardboard production line mainly consist of the following equipment: mill roll stand, pre-heater. single facer, conveying span bridge,double facer,slitter ccorer, glue making system, etc. Different models and quantities equipment can compose different models and grades 3ply,5ply,7ply corrugated paperboard production line. Get a quote.
A complete Corrugated Cardboard Production Line includes the following machines: mill roll stand, pre-heater, splicer, single facer, overhead bridge, mulit-preheater, and glue machine, double baker facer, slitter scorer, cut-off stacker and ect.
Raw paper roll is fed to the mill roll stand. After heated and moisture ajusted by the pre-heater, raw paper will go to the single facer, corrugated by it, and gluing together with another raw paper to become single faced corrugating paper. Then conveyed through the over head bridge, re-heated by mult-layer preheater, after glued by gluing machine, jointed by the double baker facer. Then, continuous corrugating board comes out.
After slitting and scoring by slitter scorer and transverse cutting by cut-off machine, corrugated board with different sizes are produced. At last, these different size corrugating board will be stacked, calculated and then sent out by the stacker.
The assembly line for automated mass production, can produce good national standard corrugated cardboard, high efficiency, good quality board to take centralized control, easy operation, easy maintenance, safety and reliability, greatly reduced the labor intensity.
The complete corrugator is composed of several units that are connected by structural steel frame and conveying mechanism. Under the control of AC electromagnetic speed adjustment system (computer control), the corrugated cardboard production line can complete non-stop production from corrugated medium feeding to finished corrugated board discharging. It comes with high automation.
1. Clamp the paper rolls on the mill stand that comes with shaft or not.
2. Preheat the corrugated medium and linerboard on preheating cylinders and make them contain appropriate moisture.
3. Feed the preheated medium and linerboard into the single facer and implement preheating once again.
4. The top corrugated roll and bottom corrugated roll will press the corrugated medium to form flute. This is joined to a flat linerboard with adhesive to form single face board. Contact us to know more.
5. Through lifting device, the single face corrugated board will be lifted to the overhead bridge conveyor and then be conveyed to the multiple pre-heater. During slow conveying, the single face board can be naturally dried.
6. After being heated in the multiple pre-heater, the board will be conveyed into the gluing machine for another gluing.
7. Then, via drying, bonding and cooling, we can get formed and flat corrugated boards.
8. Further, in the slitter scorer, the corrugated board can be cut into required width. Via cross cutter, finally, the corrugated board with needed specifications can be produced.
1.The product line is complete and can meet any of your needs in the carton box production industry;
2.The experienced team can provide you with systematic solutions;
3.Products are exported to many countries and regions, such as Korea, Europe, India, Mexico, Egypt, Turkey, Canada.
About more details,please contact us at your convenience.
1. A corrugator is a group of machines designed to form single, double or triple wall panels from three, five or seven sheets of paper in a continuous process.
2. Corrugating and gluing the grooves to a single liner.
3. Gluing the outer lining to make rigid panels.
4. Cutting the board to the desired size.
5. Three sheets of paper (cardboard) are simultaneously unrolled on the corrugator: the inner liner, the outer liner and the intermediate medium (also called corrugated board).
6. A "wave" is given to the medium table. This corrugation is obtained by pressing the sheet under heat with grooved metal rolls. This operation gives the paper a fluted shape in the single-sided machine.
7. Starch is applied to the fluted tip on one side, and the outer and inner liners are glued to the tip of the corrugated medium from the outer and inner sides, respectively.
8. The corrugated board comes out of the corrugator as a flat sheet.
1. The processing of corrugated board includes all processes from the flat sheet to the finished product (mainly packaging). These processes include printing, die-cutting, folding and gluing (taping or stitching).
2. The operations vary depending on the customer's specifications and the type of packaging.
3. The converting process varies depending on the type of packaging.
1. Printing on corrugated paper is always possible, regardless of the type of packaging.
2. Flexographic printing processes are commonly used for printing on corrugated paper. In recent years, digital direct printing has entered the market, offering new possibilities.
3. Printing can be done "in-line" or "off-line".
1. Most corrugated boxes are manufactured on a flexo folder gluer (FFG) that combines printing, straight cutting, folding and gluing. These processes can also be performed on a different machine.
2. The package is then placed on a pallet and prepared for flat shipping to the customer.
3. Die-cutting is a process of cutting and creasing sheets in a specially designed form to create the unique share of packaging desired by the customer.
A corrugated board production line is a set of professional equipment used for producing corrugated cardboard. It is composed of several key components, including a Mill Roll Stand, surface paper (core-paper) pre-heater, single facer, Conveying Bridge, Glue Application Machine, Double Facer, Slitter Scorer, Cut-off, Conveyer and Stacker, Heating System, Air compression system and Glue Making System. These components work together to create high-quality corrugated cardboard of varying thicknesses (3ply, 5ply, 7ply) and flute profiles (UV type A, B, C, E).
As a corrugated board production line manufacturer, Dongguang Chenxiang Machinery Co., Ltd. offers a wide range of corrugated board production lines designed to meet the requirements of customers, utilizing advanced skills from both domestic and international sources.
In terms of price, the cost of a corrugated board production line can vary depending on the specifications and quality of the equipment. However, Dongguang Chenxiang Machinery Co., Ltd. provides cost-effective solutions, making it a leading corrugated board production line factory in the market.
If you're going to wholesale high quality corrugated cardboard production line made in China, welcome to get more information from our factory.
![Automatic Flexo Printer Slotter Folder Gluer Strapper Line [Case Maker Line]](http://image.chukouplus.com/upload/C_1273/file/20211208/a6eabe1a281d0e95e06f03d61515ee0e.jpg?x-oss-process=image/format,webp,image/resize,m_pad,h_750,w_1920,color_FFFFFF "Automatic Flexo Printer Slotter Folder Gluer Strapper Line [Case Maker Line]")
